Manual

USERGUIDE

POWERING ON YOUR SABER

Hold down the button to bring your saber out of Sleep Mode. You will hear an introductory sound say 'Power On.' The hilt is now in Wake Mode and ready for use.

IGNITE THE SABER BLADE

Tap the button once to ignite your saber blade.

ACTIVATE SLEEP MODE

To turn off your saber completely and save battery, press and hold the button down for 10 seconds.

Now you've got the basics, it’s time to learn about your saber's functions and effects!

BLASTER DEFLECT
  • A quick tap of the button (Saber Ignited)
LOCK-UP
  • Hold for 1 Flash (0.5 seconds)

INFINITE COLOUR CHANGING

  • Hold the button for 2 flashes (1 Second) to cycle through the colour variants. Tap the button once to select your custom colour (Saber Ignited)
    FAST COLOUR CHANGING

    • Hold the button for 3 flashes (1.5 Seconds) to cycle quickly through major pre-set colour options. Tap the button once to select your custom colour (Saber Ignited)
    TURNING OFF YOUR BLADE
    • Hold the button for 4 flashes (2 Seconds) to turn off your saber blade
    CHANGE VOLUME
    • Hold the button for 1 flash (0.5 Seconds). Your saber has 3 volume adjustment settings; High, Low, Mute (Blade Off)

    CHANGE BLADE LIGHTING EFFECTS

    • Hold the button for 2 flashes (1 Second). Your saber has 3 lighting effects; Steady, Unstable, Pulse (Blade Off)

    MOTION CONTROL

    • Hold the button for 3 flashes (1.5 Seconds) to activate or deactivate motion control (Blade Off)

     There are 3 types of Motion Control:

    1. Twist your wrist
    2. Stab and pull
    3. Swing your saber
    • The above methods can be used to activate/deactivate your saber blade while motion control is ON

    • Twist your hilt to change sound effects (Blade Off)

    FLASH ON CLASH (FOC)

    • Hold the button for 4 flashes (2 Seconds) to turn ON/OFF FOC (Blade Off)

    CHANGE SOUND EFFECTS

    • Hold the button for 5 flashes (2.5 Seconds). Your saber has 12 sound effects; The High Ground, Rage Knight, Princess, Scavenger, Emperor, Serenity, The Second, The Dark Sword, The Dark Lord, The Fallen, The Count (Blade Off)

    Trouble Shooting

    Should you find any issues with your saber, here you will find all the troubleshooting information to help you fix the problem.

    Saber has no sound

    Saber may be in mute mode. Turn off your saber, then hold the button for 1 flash (0.5 seconds) to change the sound volume. Your saber has 3 different volume settings: High/Low/Mute

     My saber has lost a colour, doesn’t light up, or has no swing or clash sounds

    This may be a low battery issue. Please charge your saber for a minimum of 4-8 hours. If the battery is fully charged and you are still having this issue, try removing and reinstalling the battery. To reach the battery, please unscrew the hilt.

    When charging, my saber vocalises ‘charging’, then immediately after, vocalises ‘ready’

    The battery may not be making contact properly with the connector plates inside. Please unscrew the hilt, remove the battery and carefully adjust the connectors so the ‘+’ and ‘-‘ both are in contact with the battery.

    Contact Us

    If any other problem occurs and the above methods won't fix your issue, please contact contact@reflektsabers.com.

     Warning

    The toy is not suitable for children under 10 years. Children under the age of 13 years should always be supervised by an adult to prevent injuries. Always act responsible, safe and respectful.

    Fully charge saber before operating! Only use the included cable with 5V wall charger or USB port equivalent. Failure to comply with these instructions could result in fire hazards or damaged electronics! This will also void your one-year warranty.