Powering on and off (make sure it has charged for at least 4 hours first)

  • To awaken it from deep sleep mode, hold the button down for 3 seconds.
  • To turn it on, tap the button or shake it strongly.
  • To turn it off, hold the button down to flash 4 times.
  • To put the saber into deep sleep mode, hold the button down to flash 8 times

Changing blade colour (saber must be turned on)

  • Hold the button down to flash twice and release your finger. Tap the button to change colour.
  • Cycle colour changing: Hold the button down to flash 3 times and release your finger. Tap the button to lock the colour.

Lightsaber effects (saber must be turned on)

  • Blaster sound: Tap the button.
  • Lock-up loop: Hold the button down to flash once and release your finger. Tap it again to end the lock up loop.
  • Flash-on-clash: The saber will automatically flash white and emit a sound when it hits another surface.

Sound effects (saber should be off)

  • Changing sound fonts: Hold the button down to flash twice to change the sound font. Repeat to cycle through the sound fonts.
  • Adjusting volume: Hold the button down to flash once to adjust the volume.
  • Smooth Swing: Sounds are being procedurally generated with input detected by the motion sensor creating a very sound to the movement of your swing delivering maximum realism.
  • Heavy Duelling: Strong metal aluminium hilt with polycarbonate blade for medium to heavy duelling.

  • Flash on Crash (FOC): Flash white and emit sound when hit for realistic saber duels.

  • Removable PC Blade: Using the tools provided you can remove the blade and add the size of your choosing.

  • Changeable Colours: 12 different colours to choose from.
  • Sound Fonts: Variety of different sound fonts.
  • Replaceable Electronics Kit: If you choose to change or upgrade you can simply remove this and replace.
  • Rechargeable: Charge for at least 4 hours before use. Please use a 5V wall charger or devices with a USB port to charge.
  • Dual Lightsabers: Two separate lightsabers can be combined to create dual lightsaber using a coupler (Only Select Models)

Trouble Shooting

Issue 1: Saber has no sound

Saber may be in mute mode. Turn off the saber, then hold the button for 0.5 seconds to change sound volume.

Issue 2 - Saber loses either red, blue or green colours does not light up at all, or has no swing or clash sounds.

Charge the battery for one hour, as this is likely a low battery issue. Removing and reinstalling the battery may fix it if the issue is not related to charge.

Issue 3 - When charging the saber cues are  'charging' then immediately indicated 'ready'

The battery is not making contact properly with the plates inside. Open the saber and carefully adjust the connectors so that the positive and negative both touch easily.

Issue 4 - If any other problem occurs and  the above methods won't fix it please contact


The toy is not suitable for children under 10 years. Children under the age of 13 years should always be supervised by an adult to prevent injuries. Always act responsible safe and respectful.

Fully Charge Saber Before Operating! Use Only Included Cable with 5V Wall Charger.


One Year Warranty

May the force be with you!