Baselit - Lightsaber Instructions
The day has come… The day that you get to harness the power of your new saber. This is as real as it gets. We're so happy that you've chosen Reflekt Sabers as your saber outpost!
Now, it's time to master your saber.
Half the fun comes from trying it out yourself, but this manual will walk you through all the saber's functions so you can fast-track your skills and become a saber master!
Saber Basics
Your journey to becoming a saber master had begun. First things first, let’s make sure your saber is fully charged. We recommend leaving your new saber on charge for 4 - 8 hours. This will give you up to 8 hours of battery life!
Your saber’s functionality is controlled by the main button located in the center of your hilt. When the button is held, the outer ring light will flash in 0.5 second intervals. Each interval corresponds to a function.
- POWERING ON YOUR SABER
Hold down the button to bring your saber out of Sleep Mode. You will hear an introductory sound say 'Power On.' The hilt is now in Wake Mode and ready for use.
- IGNITE THE SABER BLADE
Tap the button once to ignite your saber blade.
- ACTIVATE SLEEP MODE
To turn off your saber completely and save battery, press and hold the button down for 10 seconds.
Master Your Saber
Now it’s time to learn about your saber's functions and effects!
- BLASTER DEFLECT
A quick tap of the button (Saber Ignited)
- LOCK-UP
Hold for 1 Flash (0.5 seconds)
- INFINITE COLOUR CHANGING
Hold the button for 2 flashes (1 Second) to cycle through the colour variants. Tap the button once to select your custom colour (Saber Ignited)
- FAST COLOUR CHANGING
Hold the button for 3 flashes (1.5 Seconds) to cycle quickly through major pre-set colour options. Tap the button once to select your custom colour (Saber Ignited)
- TURNING OFF YOUR BLADE
Hold the button for 4 flashes (2 Seconds) to turn off your saber blade
- CHANGE VOLUME
Hold the button for 1 flash (0.5 Seconds). Your saber has 3 volume adjustment settings; High, Low, Mute (Blade Off)
- CHANGE BLADE LIGHTING EFFECTS
Hold the button for 2 flashes (1 Second). Your saber has 3 lighting effects; Steady, Unstable, Pulse (Blade Off)
- MOTION CONTROL
Hold the button for 3 flashes (1.5 Seconds) to activate or deactivate motion control (Blade Off)
There are 3 types of Motion Control:
- Twist your wrist
- Stab and pull
- Swing your saber
The above methods can be used to activate/deactivate your saber blade while motion control is ON
Twist your hilt to change sound effects (Blade Off)
- FLASH ON CLASH (FOC)
Hold the button for 4 flashes (2 Seconds) to turn ON/OFF FOC (Blade Off)
- CHANGE SOUND EFFECTS
Hold the button for 5 flashes (2.5 Seconds). Your saber has 12 sound effects; The High Ground, Rage Knight, Princess, Scavenger, Emperor, Serenity, The Second, The Dark Sword, The Dark Lord, The Fallen, The Count (Blade Off)
Trouble Shooting
Should you find any issues with your saber, here you will find all the troubleshooting information to help you fix the problem.
Saber has no sound.
Saber may be in mute mode. Turn off your saber, then hold the button for 1 flash (0.5 seconds) to change the sound volume. Your saber has 3 different volume settings: High/Low/Mute
My saber has lost a colour, doesn’t light up, or has no swing or clash sounds.
This may be a low battery issue. Please charge your saber for a minimum of 4-8 hours. If the battery is fully charged and you are still having this issue, try removing and reinstalling the battery. To reach the battery, please unscrew the hilt.
When charging, my saber vocalises ‘charging’, then immediately after, vocalises ‘ready’.
The battery may not be making contact properly with the connector plates inside. Please unscrew the hilt, remove the battery and carefully adjust the connectors so the ‘+’ and ‘-‘ both are in contact with the battery.
Contact Us
If any other problem occurs and the above methods won't fix your issue, please contact contact@reflektsabers.com.
